NeonPocketMC Flasher

✓

Firmware is ready

The NeonPocket home/status screen is visible. I paired or connected using the PIN shown by the device. My identity, contacts and channels loaded correctly.

✓

WDG Mesh Sidecar is ready

Use this Heltec beside your Biscuit Pro or other Wi-Fi wardriver. It listens only for live MeshCore adverts on the Canada preset and sends eligible located nodes directly to WDGWars.

The WDG Mesh status screen is visible. I joined the temporary WDG setup Wi-Fi using the 8-digit PIN on the device and opened 192.168.4.1. I entered a 2.4 GHz hotspot and my WDGWars API key—not WiGLE credentials. The screen reached WDG READY.

Live-only safety: there is no WiGLE import, history scan, saved upload backlog, catch-up, or backfill.

✓

MeshGangs collector is ready

Desktop uploader key · shown once

Privacy: message text and raw packets are rejected. Mobile GPS stays between Android and MeshGangs; it is never sent over LoRa.

Complete DeskOS setup

The ESP32 is only one part of a D1L clean install. DeskOS is not fully installed until the RP2040 bridge and FAT32 SD card pass device-side verification.

DeskOS install · 1 of 3 ESP32 ready; storage setup is required Next, install the RP2040 SD bridge. Do not close this page yet.

1 of 3

ReleaseChecking…

BuildChecking…

HealthChecking…

1

ESP32 DeskOS firmware

The selected release, commit, board, interface, and storage response were checked over USB.

Verified

2

RP2040 SD bridge

Hold BOOTSEL while reconnecting the RP2040 USB side, then select its drive containing INFO_UF2.TXT.

Not checked

3

DeskOS SD card

Select an already-formatted FAT32 card. The flasher only adds missing DeskOS folders and verified files; it never formats, deletes, or replaces different files.

Not checked

DeskOS verification will appear here.

DIAL. FLASH. VERIFY.

Choose device

Choose build

Choose one MeshGangs role

Flash

Restart

Configure

Firmware is ready

WDG Mesh Sidecar is ready

MeshGangs collector is ready

Complete DeskOS setup

Node and radio

2.4 GHz Wi-Fi and MQTT

Local security

DIAL. FLASH. VERIFY.

Choose device

Choose build

Choose one MeshGangs role

Flash

Restart

Configure

Firmware is ready

WDG Mesh Sidecar is ready

MeshGangs collector is ready

Complete DeskOS setup

Node and radio

2.4 GHz Wi-Fi and MQTT

Local security

Put an RTL-SDR to work for WDG.